If your water source is a borewell or well with high salt content, a 30000 brackish water RO plant can turn it into clean water for industry, farms or hotels at up to 30,000 gallons a day. Water Treatment LLC supplies and installs these plants in Dubai and across the UAE, as part of our range of industrial RO plants. Send us your water analysis, and we will confirm the setup and the price.
Key Features
- Produces 30,000 GPD from brackish water
- 95 to 98% salt rejection and 50 to 60% recovery
- Multi-stage setup: sand and gravel and activated carbon pre-treatment, then RO
- Corrosion-resistant FRP vessels and stainless steel high-pressure piping
- Low power use for its capacity
- Simple operation and low maintenance
Technical Specifications
| Specification | Details |
| Capacity | 30,000 GPD (about 113 m³/day) |
| Feed Water | Brackish water |
| Salt Rejection | 95 to 98% |
| Recovery Rate | 50 to 60% |
| RO Membranes | CSM 8040 (400 sq ft) x 4 |
| Pressure Vessels | FRP 8040 x 2 |
| High-Pressure Pump | About 4 kW, Grundfos CRI 5-29 or similar |
| Pre-Treatment | Sand, carbon and cartridge filters |
| Piping | SUS304 high pressure, UPVC low pressure |
| Test Temperature | 25°C |
Applications
- Process water and cooling towers in factories
- Bottled water, beverage and dairy processing
- Farm irrigation with saline groundwater
- Hotels, resorts and large commercial buildings
- Boiler feed and laboratory water
Why Choose Us
A plant of this size depends on the feed water, so we go through your analysis before quoting. This avoids scaling and membrane problems later. We supply the plant with the right dosing pumps and antiscalant chemicals, and keep RO membranes and spare parts in stock. If your demand is lower, our 20000 GPD brackish water RO plant or 18000 GPD RO system may suit you better.
Buy 30000 GPD RO Plant in UAE
For the 30000 GPD RO plant price in UAE, send us your water source, TDS reading and site location on WhatsApp or email. We will reply with the plant details, price and delivery time. For a 30000 GPD RO plant in Dubai, we can also add an industrial RO control panel and a high pressure pump if needed. If you need product water with very low TDS for boilers or labs, ask about an industrial separate bed deionizer after the RO.
Frequently Asked Questions
What water details do I need to share to get an accurate quote for a brackish water RO plant?
A recent lab analysis matters more than anything else. The key values are TDS, hardness, chloride, silica, iron, pH, and water temperature. Silica and hardness decide how much scaling risk the membranes face, and iron or turbidity decide how much pre-treatment you need. If you do not have a report yet, send us the borewell location and we can advise on testing before we size the plant.
How much borewell water does a 30,000 GPD RO plant need?
A plant that makes about 113 m³ of clean water a day needs more feed water than that, because part of the feed leaves as reject. At a typical recovery of 50 to 60%, the borewell should supply roughly 190 to 225 m³ per day, or around 8 to 9 m³ per hour if the plant runs around the clock. Check your well’s tested yield before ordering, since a plant that is starved of feed water cannot run at its rated output.
Is 30,000 GPD enough for my hotel, farm, or labour camp?
Start with your daily demand. A common rule is to estimate litres per person per day for camps and hotels (this varies widely with use, so confirm it for your site), then add process water, irrigation, or cooling tower make-up. A plant can also run fewer hours or be paired with a storage tank to cover peak demand. Send us your headcount or daily consumption and we will tell you whether this size fits or whether a smaller or larger model suits you better.
What happens to the reject water from a brackish water RO plant?
Every RO plant produces a concentrated reject stream, which is more saline than your well water. Depending on its salinity and local rules, it may be sent to approved drainage or evaporation, or reused for lower-grade needs such as certain irrigation or washing uses. Because disposal rules vary by site and emirate, plan for it before installation. Tell us your location and we can discuss practical options with you.
What affects the cost of a 30,000 GPD RO plant, and how long do the membranes last?
Price depends mainly on your feed water quality, the pre-treatment needed, the pump and control options, and the installation. Running costs come from electricity, antiscalant and cleaning chemicals, cartridge filters, and membrane replacement. With good pre-treatment and regular cleaning, membranes often last several years, but poor feed water or skipped maintenance shortens that sharply. Send us your analysis and site details and we will give you a quotation along with what to expect for running costs.
